X-ray Detection Machine XXG-2505
Technical Description of the Equipment: The steel plate and casting part X-ray detecting system (XXG-2505) is the high tech product, which unifies the X-ray electronic technology. The system has the following strong point , high automatic, quick detecting speed , low cost, the detecting data easy to take care and inquiry. It is suitable for the detecting of each kind of steel plates or casting parts.
The range of application and equipment main parameter: The main application scope of steel plate and casting part inherent drawback detecting product as following: the X-ray non-destructive inspection on nonmetallic, light metal, the casting, each kind of alloy, the pressure vessel and so on. Main examination weld defect (crack, blowhole, entrapped slag, fusion, not penetration and so on). Uses the advanced frequency conversion technology, increases by automatically detecting and all kind of protection function: Also it has the characteristics of high reliability and long life used.
Type TX-2 instrument panel under the disposition of the XXG-2505 ,is designed according to mature technology of the similar products home and abroad,which selects the high performance processor, the integrated circuit and the modular part.The key element adopts imported components, which enhances the reliability of long-term use, and it has automatically training machine and time-delaying function, which high anti-jamming ability is fit for wild generator job.
XXG-2505 Detecting Machine Controller
X-ray generator made in our factory has made the revision to the conventional product, smaller volume, lighter weight, more reasonable in the internal high-pressured structure.more reliable performance ,especially qualified for field work.
XXG-2505 Detecting Machine Generator
Cooling-down Method: forced air cooling
Insulation Method: SF6 gas insulation
Relative Humidity:not above85%
Sea Level:not above1000meter
Input Power:not less than 3.6KVA
Output Voltage (peak value KVP):150~250KVP
Output Diode Current (average):5MA
Focus Point of Ray Tube:2.0×2.0
Radiation Angle of Ray Tube:40+5°
Focal distance 600 mm, Exposure Time 5 minutes;
Tianjin III Film, two-sided 0.03 intensifying screens;
Development Condition: 20ºC 5 minute
Biggest Penetration Thickness: 40mm
Working 1:1 5 minutes work, 5 minutes rests
Main Configuration Details Enclosed 3.1 X ray Generator 1
3.2 Control Unit 1
3.3 Power Cable 10M
3.4 Connecting Cable 20M