Portable Hammer Impact Brinell hardness tester

FEATURES:

1) The B-1580P portable hammer Impact hardness tester is designed following the Brinell hardness test method. The test force is controlled by a shear pin. After reading the diameter of the indention with the reading microscope, the Brinell hardness value can be obtained from the look up table.

2) This kind of hammer impact Brinell hardness tester is capable of testing from small to very large specimens. It is especially suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut. The test can be completed in any direction to test the hardness of upper, lower and lateral part of the specimen.

3) The B-1580P Pin Impact hardness tester can be widely used to test the hardness of forgings, castings, steels, nonferrous metal and its alloy products, and to test the hardness of annealed, normalizing and tempered mechanical parts.

4) Compared to the rebound type hardness tester, the Brinell hammer hit tester has many advantages such as higher precision, fewer factors affecting accuracy and lower requirement on the surface roughness. The test result meets the requirements of most drawings without conversion and is more widely accepted in the international business.

APPLICATION:

Suitable for testing the huge, super-huge parts of Castings, Forgings, Steel Products, Heat Treatment industries.

TECHNICAL PARAMETERS:

STANDARD ACCESSORY:

1. Tester

2. 7.26mm Steel ball indenter

3. Pin and pin cleaner

4. Brinell hardness block

5. 20X Reading Microscope with LED light

6. Carrying box