Large Automatic Metallographic Sample Cutting Machine CM-400YZ

Application range:

It is suitable for various ferrous metals, non-ferrous metals, heat treatment parts, forgings, semiconductors, crystals, ceramics and rocks etc.

Introduction:

This machine is a Mitsubishi PLC controlled automatic metallographic sample cutting machine, with X, Y, Z directions automatically and precisely controlled. With intelligent cutting, the amount of feed can be adjusted depending on the material’s hardness to achieve the fastest cutting effect. Cutting speed is frequency conversion controlled, which has very high reliability and control ability.

Features:

(1) Free conversion between electronic hand wheel and automatic control.

(2) The Mitsubishi 10’’ touch screen displays various cutting data.

(3) Precise positioning.

(4) Flat push cutting, Chop cutting, sweep cutting, three functional cutting ways, according to the material’s hardness, it can change the cutting speed to achieve the fast cutting effect.

(5) In order to make the cutting room easy to clean and ensure the safety of spindle motor, we adopt mechanical and electrical separation.

(6) There is a large observation window on the cutting room security cover, makes the user easy to observe the entire process of cutting samples.

(7) Installed LED lights in the cutting room, it achieves effective lighting for the entire area of the cutting room.

(8) The indoor ventilation fan can ensure the efficient flow discharge of various steam and smoke caused by the cutting and increases the indoor brightness and clarity.

(9) The design is more humane, using the principles of ergonomics. The machine with low noise, easy to operate, beautiful appearance, safe to use, therefore it is one of the ideal equipment for laboratory sample preparation.

Structures:

1) The body form: vertical. Mainly composed of upper (safety cover), middle (frame), right sliding door, side door, the lower frame (electrical box, tool box), fixture, rinsing tap, cooling water tank (independent).

2) It adopts frequency conversion motor, direct cutting disc, stepless speed regulation, concise design and solid structure. The direct driving provides the transmission between the motor and the cutting disc, and ensures the high efficiency, low noise, less maintenance and longer service life.

3) Design of special cutting for large workpieces, it makes the maintenance of machine parts and processing of large workpieces easier. Sliding door and hinged door makes you have more space and unlimited access, more convenient for you to place the large workpiece in the right position. You can put the workpiece into the cutting room from three directions (up, front and left).

4) The work area adopts totally enclosed structure and a transparent protective cover for the observation of cutting.

5) Equipped with a cooling water tank for storing cooling liquid, do avoid using tap water as cooling liquid. After the cutting work is finished, use the left rinsing tap to rinse the indoor garbage and then close the safety door.

Main Parameters:

Packing List: