Service Hotline
0576-86011208
English
Home / Product / Sample Preparation Machine / Sample Mounting Press / Vacuum Inlaying Machine / Cooling Mounting Press Machine
Share to:

Vacuum Inlaying Machine / Cooling Mounting Press Machine

Cold mounting by pressure, maximum pressure -0.1Mpa
Each time can inlaying over 10 pieces of samples
  • MP-3000V
  • EBP INSTRUMENTS
  • Shanghai, China
  • 200 Sets Per Month
  • T/T in advance
  • 1 set

Product introduction:

MP-3000V can exclude the air contained in the sample. Without the presence of air, the embedded compound would fill the sample's gap, eliminating the gap between the sample and the compound. Therefore, edge retention is strengthened and fragile samples are well supported during grinding and polishing.

A sturdy vacuum pump provides enough vacuum to quickly remove any air in a porous sample. With the unique rotating cup holder in the vacuum container, multiple samples can be soaked in vacuum at the same time.

A unique casting mechanism is designed so that the embedded compound can be placed in the cavity and poured into the mold at one time. Can be applied to various epoxy resin and polyester castable inlay (cold) compounds. Since the sample is encapsulated in a vacuum, the possibility of air entering is completely eliminated.

 

Easy to use:

Place the sample mold in a vacuum container

After the inlaid compound is mixed, put the stirring cup into the cup holder to put the vacuum container on the base

Pour the inlaid compound into the mold, pour and hold for one minute, then turn to atmospheric pressure

Repeat this cycle several times to open the cavity and allow it to solidify normally.

 

Technical specification:

Item

Specification

Remark

Mould size

φ30mm silicon mould

Optional 40, 50mm

Vacuum pump

Max vacuum degree: -0.1Mpa

Pumping rate: 7.2 m³/h


Input voltage and power

Single phase 220V, 50/60Hz  370w


Dimension

Vacuum container: 300 x 300 x 300 mm 

Vacuum pump: 340 x 130 x 270 mm

(L x W x H)


Maximum Quantity of samples

> 10 pieces

φ30mm

Weight

Vacuum container: 1.15kg

Vacuum pump: 11.5kg


 

Standard accessories:

Item

Quantity

Item

Quantity

Vacuum pump(with vacuum meter)

1

100ml measuring glass

1

Vacuum container

1

CM4 cold mounting resin

Resin 200ML + curing agent60ml

1

Connecting pipe

1

Manual

1

Mould (φ30mm silicon mould)

3

certificate

1

  Add
No. 56, Danshan Industrial Zone, Wenling City, China 317523
  Phone
0576-86011208 / 13524552810
  E-mail
sales@hiebp.com

All employees of EBP strives for development by quality and survival by service. We sincerely look forward to establishing a good and long-term cooperative relationship with you.

Quick Navigation

Copyright ©2020 EBPU ELECTROMECHANICAL EQUIPMENT (ZHEJIANG) CO., LTD. Technical support leadong